Contacts
Address
USA, California, Benicia, 94510-1129, 251 W Channel Rd
Director
Charles O Brian, Owner
Phones of enterprise
management
+1
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Krogh Pump Co, Company
Equipment - industrial and commercial machinery and computer equipment. Pumps and pumping equipment
In stock
The GVC is based on the same product platform as our vertical sump and horizontal, end suction pumps. Hydraulic performance extends to 2,500 GPM at 1,750 RPM and is covered by twenty-five sizes in cast iron, 316 SS fitted, and all 316 SS construction. For added simplicity, the entire series is...
Group: Console pumps
In stock
Hydraulic performance for the ETA extends to 9,500 GPM and 360 feet of head. This range is covered by thirteen sizes in cast iron and bronze-fitted iron as the standard, off-the-shelf materials with higher alloys also available.
All ETA's feature large stuffing boxes, high efficiency enclosed...
Group: Industrial pumps
In stock
Hydraulics
Flows to 2,500 US GPM (570 m3/hr)Efficiencies to 80%Solids to 1.250" diameter (32 mm)Power to 75 HP (55 KW)Depths to 22 feet (6.5 m)
ApplicationsBilge transferCaustic and chemical feedCoatings and spray paint systemsDistrict flood controlFarm irrigationLube oil supply for...
Group: Industrial pumps
In stock
The basic GVS design consists of a pumping (wet) end, bearing frame, drive shaft, motor mounting bracket, top plate, and discharge piping. All models feature external impeller adjustment, bearings above the liquid surface, no mechanical seals to maintain, full compatibility with standard NEMA C...
Group: Industrial pumps
In stock
The RS is offered with ANSI 300 lb. inlet flanges and ANSI 600 or 900 lb. discharge flanges, depending on the pressures and number of stages involved. Either way, hydraulic performance extends to 1,400 GPM and 3,400 ft. TDH, which surpasses that of all comparable pump types and makes it ideally...
Group: Centrifugal pumps
In stock
The RS is offered with ANSI 300 lb. inlet flanges and ANSI 600 or 900 lb. discharge flanges, depending on the pressures and number of stages involved. Either way, hydraulic performance extends to 1,400 GPM and 3,400 ft. TDH, which surpasses that of all comparable pump types and makes it ideally...
Group: Centrifugal pumps
In stock
The GH is Carver's horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general industrial applications. Hydraulic performance extends to 2,500 GPM and is covered by twenty-eight sizes in cast iron, bronze fitted, 316 stainless steel fitted, and all...
Group: Centrifugal pumps
In stock
The GH is Carver's horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general industrial applications. Hydraulic performance extends to 2,500 GPM and is covered by twenty-eight sizes in cast iron, bronze fitted, 316 stainless steel fitted, and all...
Group: Centrifugal pumps
In stock
Hydraulic performance for the ETA extends to 9,500 GPM and 360 feet of head. This range is covered by thirteen sizes in cast iron and bronze-fitted iron as the standard, off-the-shelf materials with higher alloys also available.
All ETA's feature large stuffing boxes, high efficiency enclosed...
Group: Industrial pumps
In stock
The M Series is Carver's end suction pump for handling freshwater, seawater, and light hydrocarbons in commercial marine and naval applications. Conforming to the requirements of ASTM F 998, including the Navy supplement, hydraulic performance extends to 5,000 GPM and 700 feet of head. This range...
Group: Industrial pumps